Dublo DFC-10 Manuel d'instructions

DUPLO CORPORATIONInstruction ManualCOLLATORDFC-12/DFC-10[220-240V]ILLUSTRATION : DFC-12

87. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS No. Name Function1 Start key Press this key to start operating the unit.

98. PRECAUTIONS ON LOADING PAPERFan paper sufficiently before loading on thebin.• If the paper is not separated well, mis-feed,double-feed or paper ja

109. OPERATIONSFlowchart of operationsThe following shows the flowchart of the basic operations.For details, refer to the text and corresponding pages

11Turn ON the power switch.• Pressing "I" turns ON the power supply.Pressing "O" turns OFF the power supply.When the downstream un

129. OPERATIONS4Load the paper on the bins.Insert the paper along the fixed guide until ittouches the guide of the paper feed gate lightly.• The maxim

139. OPERATIONS7Adjust the side guide F to the paper size.9Set the collation mode, paper receivingmethod, and count display method onthe control panel

149. OPERATIONS11Press the Start key and start operations.To stop operations, press the Stop key.Turn OFF the power after completing op-erations.The c

1510. LOADING PAPER ACCORDING TO COLLATION MODEDetermine how to load paper according to the operation to be carried out after collation.See the figure

1610. LOADING PAPER ACCORDING TO COLLATION MODE10-2. Loading paper for interleaving mode10-3. Loading paper for alternative modePáginas clasificadasPa

1710. LOADING PAPER ACCORDING TO COLLATION MODE10-5. How to load paper when downstream unit is connected• Paper ejected from the DFC-12/10 is punched

DECLARATION OF CONFORMITYDUPLO CORPORATION, located at 7-6, Izumi-honcho 1-chome, Komae-shi, Tokyo 201-8666, Japan, declares that the followingproduct

18A5 A4 A3 A3SR B5 B4 LGL LTR LGR INV%????????%??XX? XX? X ?10. LOADING PAPER ACCORDING TO COLLATION MODE10-6. Loading paper according to paper sizeTh

1911. USING THE CONTROL PANEL● Paper size• Set when using the downstream unit.If no downstream unit is connected, the paper size will not be displayed

2011. USING THE CONTROL PANEL11-2. Setting the collation modeSelect the collation mode from NORMAL, INTERLEAVING, BLOCK, and ALTERNATIVE.• The "B

2111. USING THE CONTROL PANEL11-3. Setting the number of interleavesWhen the interleaving mode is selected, interleaves will be inserted after every s

2211-4. Setting the count display methodSelect the count display method from the count up display and count down display. Count up display methodThe N

2311. USING THE CONTROL PANEL11-5. Setting the paper receiving method• Paper can be ejected to the paperreceiving table in two ways; theOFFSET mode wh

2411. USING THE CONTROL PANEL11-6. Other settingsIf the paper ejected to the downstream unit or paper receiving table is not aligned prop-erly, or the

25For auto, the speed is adjusted automatically according to the paper size, number of sheets, overlap,paper receiving mode, and whether the downstrea

2611. USING THE CONTROL PANEL1Set the "Initial Qty Rpt" screen to ON to repeat the same collation operation with the count downdisplay metho

2712. CONNECTING THE DOWNSTREAM UNIT12-1. Connecting the DBM-120 and DBM-120TDownstream units (DBM-120, DBM-120T) can be connected to the DFC-12/10 to

11. INTRODUCTIONThank you for your purchase. To ensure correct usage, please read this instruction manualthoroughly, especially the section Safety Pre

281Setting paper sizePaper size can be selected from A3, A4, A5, B4,B5, LGR, LGL, LTR, INV, A3SR, custom 1, cus-tom 2, and custom 3.To set custom 1 to

292Press the key and display thescreen for selecting custom 1 to 3.Pressing the key switches be-tween the screens for selecting custom 1size, custom

3012. CONNECTING THE DOWNSTREAM UNIT7Press the key to return to thestandby screen.Press the key until the standby screenis displayed.5Enter the lengt

31Set whether or not to use the trimmer (DBM-120T) connected to DBM-120 using the followingprocedure.(For details on the trimmer, refer to the instruc

3212. CONNECTING THE DOWNSTREAM UNITPaper conveyed to the downstream unit when paper feed error occurs (no paper, mis feed, double-feed,etc.) will be

3312. CONNECTING THE DOWNSTREAM UNIT12-2. Connecting DC-S and DC-S4• Downstream units (DC-S, DC-S4) can be connected to the DFC-12/10 to staple and pu

3413.DOUBLE-FEED DETECTION FUNCTIONUsing the sensor for measuring paper thickness, the thickness of paper fed by presetsettings is read as the referen

3513.DOUBLE-FEED DETECTION FUNCTIONSwitching the double-feed detection sensor between ON/OFF1Press the key and display"Double detect Set".P

3614. WHEN BIN ERROR LAMPS LIGHT/BLINKWhen paper feed errors occur during op-erations, the warning alarm sounds, andthe bin error lamps on the control

3714. WHEN BIN ERROR LAMPS LIGHT/BLINK14-3. When an error lamp blinks in green14-4. When an error lamp blinks in redNo paper has been fed from the bin

23. SAFETY PRECAUTIONSWARNING:Do not place metal objects or vessels containing liquids on top of the unit. The entry ofany metal object or liquid coul

3815. WHEN ERROR MESSAGES ARE DISPLAYEDWhen errors occur, a warning alarm sounds, and an error message will be displayed on theLCD.15-1. When "No

3915. WHEN ERROR MESSAGES ARE DISPLAYED15-3. When "Feed error" is displayed15-4. When "Preset Error" is displayedPaper has jammed

40No paper has been fed.• Check the bin where the error lampis blinking in green.• Refer to "14. WHEN BIN ERRORLAMPS LIGHT/BLINK" ( page 36)

4115. WHEN ERROR MESSAGES ARE DISPLAYED15-7. When "Paper Jam" is displayed15-8. When "Stacker jam" is displayedPaper has jammed in

42The vertical conveyance cover is not com-pletely closed or when it has been openedby mistake during operations.• Close the vertical conveyance cover

4315. WHEN ERROR MESSAGES ARE DISPLAYED15-11. When “On-line err" is displayedAn error has occurred in the downstream unit.• Check the error on th

4416. TROUBLESHOOTING• When paper does not jam even though "Paper Jam" is shown in the control panel of DBM-120T• When paper is ejected wit

4517. TROUBLESHOOTING GUIDECauseSolutionSymptomsIs the vertical conveyance coveropen?Is the paper receiving table fullystacked with paper?Have problem

46Malfunction to be investigated by ser-vice personnel.• Turn OFF the power switch, waitfor about 30 seconds, and thenturn it ON again. If any of the

4718. LCD MENU(XX page) Proceed to the corresponding page.(Indicates blinking display)(Size cannot be changed if a downstream unit (DBM-120) is not co

33. SAFETY PRECAUTIONSMake sure that the combined power consumption of the appliances to be connecteddoes not exceed the capacity rating of the power

4818. LCD MENU(Indicates blinking display)

49(Indicates blinking display)18. LCD MENU

5018. LCD MENU(Indicates blinking display)

5119. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS Cleaning the unitInk or paper dust adheres to the paper feed ring or paper separator which feed

5220. SPECIFICATIONSNote 1: For the OFFSET mode, B5 size (182 mm x 257 mm) to A3 size (297 mm x 420 mm) paper can be used.Paper measuring less than 18

This page is a blank page.

11T-90047-02120001S-0

43. SAFETY PRECAUTIONSCAUTION:Always disconnect the power plug from the power outlet when the unit is not to be usedfor an extended period. Failure to

54. USAGE PRECAUTIONS• This equipment shall be installed near the socket-outlet where the plug on the power supplycord is easily accessible.• Make sur

65. FEATURES OF THIS MACHINEThe DFC-12 and DFC-10 can collate paper sizes from A5 to A3SR.The DFC-12 can collate 12 sheets and the DFC-10 can collate

76. NAMES OF PARTSControl panelVertical conveyance coverHandleSliding plateMovable guidePaper feed ringBinFixed guideAuxiliary paper feed bin Con